Troubleshooting, Pairing Panasonic, Problems Solutions

ENGLISH

TROUBLESHOOTING		Sony Ericsson

	PROBLEMS	SOLUTIONS

	The TT01 announces: "Bluetooth®	Switch off your telephone, then switch it back on
	connection problem "	again if the TT01 cannot be operated .
	Your telephone does not detect the	Switch off your telephone, then switch it on
	hands-free kit	again. Check that the Bluetooth® connection of
		your telephone is enabled.
	Your telephone is not detected.	Repeat the connection phase.

	The person you are calling	Turn down the communication volume.
	complains of an echo during
	communication.

	WARNING : refer to your Sony Ericsson telephone’s instructions if necessary

PAIRING		PANASONIC X70

When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.

IMPORTANT : The hands free kit is only operative when the car ignition is on (IGN)

Procedure :

Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01 by pressing and holding the red/green buttons at the same time.

Switch on your phone, turn the key in the car ignition and two indicator lights on the keypad should light up to indicate your hands-free is powered up. Now carry out the following sequence on your phone.

Access the main Menu and select “Organizer", press "Select". Go to “Connect” and press “Select” again. Enter “Bluetooth®” then enter the “On/Off” menu.

Select “On” if it is not selected yet. Get back to the “Bluetooth®” menu by pressing . Select “Discover & Pair” When the search is over, select «TT01 CK3.xx». Press “Pair” to establish the connection. The display reads, "Bluetooth® passkey", enter 1234 then " OK".

COMMUNICATING

PANASONIC

The TT01’s green and red buttons are the main devices to make and receive calls.

Answering calls:

∙Press the TT01’s green button to answer the call.

∙Press the TT01’s red button to hang up at the end of a call or to reject a call.

Make a call in TOUCH & TALK mode:

∙Briefly press the green button, wait for the tone, then say the name of the person you want to call. E.g.: press green button, [beep], John..

∙Press the red button to hang up.

Please refer to “MEMORIZATION of VOICE TAGS” section for name voice recognition.

Making a call manually:

∙Use the phone keypad to dial the number. When the call gets through press the green button to switch to hands free mode.

Managing Dual Calls:

∙A warning tone will alert you if someone is trying to get through while you are engaged on another phone call.

∙Press green button once to communicate with a new caller.

∙Press green button once to return to your first caller.

∙To end the present communication, press red button once.