P74500ea_F8T061_man.qxd 2/6/04 3:49 PM Page 22
Pairing to a Bluetooth Technology-Enabled Phone
6.Select “Auto”, then select the “Add” button.
7.Once you’ve done this, the P800 will detect all the discoverable Bluetooth devices within its range.
8.Once the P800 has detected your “Belkin Headset”, select it and when prompted for the passkey, enter “0000” and select “Done”.
9.You have now successfully paired your Bluetooth
10.You may select the “Done” button to return to the Control Panel.
Pairing to a Bluetooth Technology-Enabled Phone
Using your Headset
Switching the Headset On and Off
To turn your Headset on, remove the Headset from the desktop charger, then press and hold the talk button until the LED indicator flashes blue five times. The LED indicator will flash blue every three seconds while the Headset is on.
To turn your Headset off, press and hold the talk button until the LED indicator flashes red five times.
Fitting the Headset
Decide which side of your head you will wear the Headset on, and use your hand on that side to slide the ear hook gently over and around your ear in a circular motion. Adjust the ear hook to your ear by molding it around the contour of your ear.
1
2
3
4
5
section
22 | 23 |