Belkin F8T061 manual For Bluetooth Technology-Enabled Phones, Charge your Headset

P74500ea_F8T061_man.qxd 2/6/04 3:49 PM Page 8

Before you Begin

Warning: The Bluetooth Hands-Free Headset and charger have magnets in them that allow them to dock with each other. Keep magnets at least two feet away from computer hard drives, and other magnetic storage media, monitors, televisions, VCRs, videotapes, cameras, camera film, credit cards, etc.

For Bluetooth Technology-Enabled Phones

The Bluetooth Hands-Free Headset is compatible with Bluetooth phones (version 1.1 phones).

Check for phone compatibility on page 2, or check with your phone manufacturer to ensure Bluetooth compatibility.

Before you Begin

Charge your Headset

Your Bluetooth Hands-Free Headset is equipped with a rechargeable lithium polymer battery and must be charged prior to use.

1.Plug one end of the power adapter into the desktop charger and the other end into an available 230V AC electrical outlet.

2.Insert the Headset into the desktop charger. The charging indicator on the charger will illuminate red.

3.Charge the Headset for approximately two hours or until the red charger indicator light goes out.

Note: The red indicator light will be on while the Headset is charging and will turn off when charging is complete.

1

2

3

4

5

section

8 9