Radio Data System Operations
Radio Data System
This unit has a
This system can display the name of the broad- cast station being received (PS) and can auto- matically switch to the broadcast station with the best reception as you move long distances (AF switching).
Also, if a traffic announcement or programme type is broadcast from an Radio Data System station, no matter what mode you are in, this broadcast is received. Additionally, if EON in- formation is received, this information enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information from other stations (TP). This function is not available in some areas. When using the Radio Data System function, always set the radio to FM mode.
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network 
TP : Traffic Programme
∗Radio Data System interrupt does not function during AM radio reception.
∗When set receives Radio Data System signal, and can read PS data, PS appears in the display.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announce- ment broadcast starts, the traffic announcement broadcast is received as top priority regardless of the Function mode so you can listen to it. Traffic programme (TP) automatic tuning is also pos- sible.
∗ This function can only be used when is lit in the
display. When is lit, this means that the Radio Data System broadcast station being received has traffic announcement programmes.
Setting the TA standby mode
If you touch the [ ] key when only is lit in
the display, 
and 
light in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traf- fic announcement broadcast starts, “TRA INFO” appears in the display. If you touch the [ ] key while a traffic announcement broadcast is being received, the traffic announcement broadcast re- ception is cancelled and the unit goes into the TA standby mode.
Cancelling the TA standby mode
As 
and 
lit in the display, touch the ]
key. The in the display goes off and the TA standby mode is cancelled.
∗ If | is not lit, touch the [ | ] key searches for a |
TP station. |
| |
Searching for a TP station
When is not lit, if you touch the [ ] key,
in the display lights and the unit automatically re- ceives a TP station.
Note:
If a TP station is not received, the unit continues the search operation. Touch [ ] key again goes off 
in the display and stops TP station searching.
Emergency broadcast
If an emergency broadcast is received, all the Function mode operations are stopped. “ALARM” appears in the display and the emergency broad- cast can be heard.
Cancelling an emergency broadcast If you touch the [ ] key, emergency broadcast reception is cancelled.
English
FZ709E 19