Clarion FZ709E owner manual About title display, Output form, Select Simple Control mode

3 - 4 .

English	iPod Operations
	transmitted from a connected iPod.
	About title display
	This unit supports the display of title information
	Character code information is UTF-8; display-
	able characters include English alphanumerics,
	some symbols, and some umlaut characters.
	Unsupported characters will be replaced by
	asterisks (∗).
	Output form
	This function is to select digital output or ana-
	log output from this unit. This setting is for video
	playback via iPod 5G.
	When you connect other than iPod 5G or when
	you play only audio files, please set this setting
	to “DIGITAL”.
	If you set this setting to “ANALOG”, optional iPod
	video cable CCA723 is required.

∗The factory default setting is “DIGITAL”.

3 - 1 . Select “OUTPUT FORM”.

3 - 2 . Touch [ ] key to enter detail setting stage.

3 - 3 . Slide along [	] slider or touch [ ] / [ ]
key to select	“DIGITAL” or “ANALOG”.

After completing settings, touch the [ENT] key to return to the 1st selected item.

Note:

The setting will only take effect after disconnecting and re-connecting the iPod.

Select Simple Control mode

This function is to select the mode to operate the iPod contents.

∗The factory default setting is “OFF”.

3 - 1 . Select “SIMPLE MODE”.

3 - 2 . Touch [ ] key to enter detail setting stage.

3 - 3 . Slide along [	] slider or touch [ ]/[ ]
key to select	“ON” or “OFF”.

ON

To operate iPod contents from iPod.

OFF

To operate iPod contents from this unit.

3 - 4 . After completing settings, touch the [ENT] key to return to the 1st selected item.

Notes:

During iPod Simple mode ON, “iPod Mode” will be displayed as below and cannot switch to other display layout:

During Simple Mode On, do not operate from iPod and this unit at the same time.

iPod 5G and iPod nano 1G cannot select both digital output and simple control mode on at the same time.

∗Output form: Digital and Simple mode: OFF - Default

∗Output form: Digital and Simple mode: ON - Not selectable

∗Output form: Analog and Simple mode: ON/OFF - Requires CCA723 cable

During Simple Mode On, please do not change the repeat setting to “OFF” in the iPod.

30 FZ709E