English | Radio Data System Operations |
The volume for TA, ALARM and PTY interrupts | |
| Volume setting of TA, emergency |
| broadcast (ALARM) and PTY |
| can be set during TA, ALARM or PTY interrupt. |
| ∗ The factory default setting for this volume is “VOL |
| 15”. |
During a TA, ALARM or PTY interrupt, slide the
[] slider to set the volume to the desired level (0 to 33).
∗When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the inter- rupt.
Radio Data System Adjustment mode
Radio Data System function
You need to enter the TUNER OPTION to per- form the Radio Data System function.
TUNER OPTION
1 . During Tuner mode, touch the [ ] key to switch to ADJ menu.
2 . Select “OPTION” in the menu to enter TUNER OPTION mode.
3 . Slide along [ ] slider or touch [ ]/[ ] key, the TUNER OPTION mode changed as following order:
“P.CH MEMORY” | (“PTY” |
“PTY SELECT” | “AF” “REG”) |
“LANGUAGE” | “PRESET SCAN” |
“AUTO STORE” | “P.CH MEMORY”... |
Notes:
Item in bracket (PTY, PTY SELECT, AF, REG) are called Radio Data System Adjustment mode.
“PTY SELECT” only available when “PTY” is on.
“REG” only available when “AF” is on.
PTY
This function enables you to listen to a broadcast of the selected programme type even if the unit is on a Function mode other than radio.
∗Some countries do not yet have PTY broadcast.
∗In the TA standby mode, a TP station has priority over a PTY broadcast station.
∗The factory default setting is “OFF”.
3 - 1 . Select “PTY”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ ] slider or touch [ ]/[ ] key to select “ON” or “OFF”.
3 - 4 . After completing settings, touch the [ENT] key to return to the 1st selected item.
ON
“PTY” in the display lights and PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.
OFF
“PTY” in the display goes off and PTY standby mode is cancelled.
Cancelling a PTY interrupt broadcast Touch the [ ] key during the PTY interrupt broadcast, the PTY interrupt is cancelled and the unit returns to PTY standby mode.
| Selecting PTY |
| |
3 | - 1 | . Select “PTY SELECT”. | |
3 | - 2 | . Touch [ ] key to enter detail setting stage. | |
3 | - 3 | . Slide along [ | ] slider or touch [ ]/[ ] |
|
| key to select the desired PTY. |
20 FZ709E