Clarion FZ709E owner manual After pairing, car stereo Bluetooth connection is not

TROUBLESHOOTING

	Problem	Cause	Measure
	After pairing, car stereo	Bluetooth® connection is not	Use your phone to manually connect
	is not able to receive and	established yet.	or select from the unit.
	make calls.	Normally it will take several seconds
			Power off and on the car stereo
		to establish the connection after
			and perform pairing again. Always
		pairing.
			make sure pairing information on
		Some phones will not automatic
			both device and main unit have
		connect after pairing.	been deleted before starting a new
			pairing activity.
			If the problem persists, please visit
			www.clarion.com for your phone
			compatibility.
		Car stereo is connected to other	Disconnect the previous device and
		device.	reconnect current device.
Telephone	Unable to reconnect to	The device pairing information may	Perform the above measure.
	car stereo using phone.	have been deleted from the unit.
	answered.	tone. This can cause the audio not	current ongoing call.
	There is no sound output	Incoming call was answered too	Please use your phone to transfer
	when incoming call is	quickly before you hear the ringing	the audio back to the phone for the
		properly transferred to the main unit	Kindly answer the call only when you
		by some phones.	hear a ringing tone next time.
			If the problem persists, please
			reconnect the phone or create new
			pairing before the next incoming
			call.
	There is no sound output	Bluetooth® communication link is	Please disconnect the phone and
	during conversation.	lost.	reconnect.
			If the problem persists, please
			create new pairing for both phone
			and main unit.
	Cannot operate the	No response from mobile phone.	Turn off and on the mobile phone.
	h a n d s f r e e f u n c t i o n
	properly.

English

FZ709E 41