English
Radio Data System Operations
Notes:
This function is disabled when a national station such as BBC R2 is being received.
The REG function ON/OFF setting is valid when the AF function is ON.
3 - 1 . Select “REG”.
3 - 2 . Touch [ 
] key to enter detail setting stage.
3 - 3 . Slide along [ 
] slider or touch [ ]/[ ] key to select “ON” or “OFF”.
3 - 4 . After completing settings, touch the [ENT] key to return to the 1st selected item.
ON
“REG” in the display lights and REG function turns on.
OFF
“REG” in the display goes off and REG function turns off.
Manually tuning a regional station in the same network
1. This function is valid when the AF func- tion is ON and the REG function is OFF.
Note:
This function can be used when a regional broadcast of the same network is received.
2.Slide along [
] slider or touch [ ]/[ ] key to call out the regional station.
3.If the reception condition of the called out station is bad, slide along [ ] slider or touch [ ]/[ ] key to select the same number. The unit receives a local station on the same network.
Switching the PTY display language You can select one of 4 languages (English, Deutsch, Svenska, Francais) for the PTY dis- played in the display.
∗The factory default setting is “English”.
3 - 1 . Select “LANGUAGE”.
3 - 2 . Touch [ ] key to enter detail setting stage.
3 - 3 . Slide along [ 
] slider or touch [ ]/[ ] key to select desired language.
3 - 4 . After completing settings, touch the [ENT] key to return to the 1st selected item.
Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwrit- ten.
3 - 1 . As lit in the display, select “AUTO STORE”.
3 - 2 . Touch [ENT] key to start performing auto store function.
3 - 3 . The stations with good reception are stored automatically to the preset channels.
∗Even if you select FM1 or FM2, a TP station is stored into memory for FM3.
22 FZ709E