Nortel Networks NT8B45AAAB, T7406 manual Changing the Handset ID Password

Handset Configuration / 31

•If you want to change the number, follow these steps:

a.Press CHANGE.

The display shows Enter Password. (six digits)

b.Enter the default password (000000).

c.Press OK to accept the code.

The display shows Press Digit 1 - 3. The current Handset ID # is displayed on the bottom left of the LCD.

d.Press the digit that you want to assign to this handset.

e.Press OK.

The display shows 6. Handset ID.

Changing the Handset ID Password

After you enter the handset ID, if you want to change the password for the ID access, follow these steps:

1.Press NEXT until the display shows 7. Chg Password.

Note: This password is used to access the Handset ID option. If you decide not to change the password, press the Option button to exit the menu.

2.Press SHOW.

The display shows Enter old PWD.

3.Enter the default six-digit password (000000) or the last password you entered.

4.Press OK.

The display shows Enter New PWD.

5.Enter a new six-digit password.

Note: For ease of administration, it is recommended that you use the same password as the one you used for the Security code/S.S. Code.

T7406 Installation Guide