Nortel Networks T7406, NT8B45AAAB manual Specifications, Off

Page 14

14 / Provisioning the T7406

A fully depleted 1400 mAh battery will be restored to full charge in three hours.

The handset charge light will turn from red to green to indicate that the handset battery is fully charged and ready for use.

The T7406 charge stand provides a rear port as a trickle charger that charges a fully depleted 1400 mAh battery in 12 to 14 hours.

Specifications

Frequency band

Half of the 900 MHz ISM band:

 

either 902 to 915 MHz or 915.1 to 928 MHz

Total channel

Spread spectrum frequency hopping is

capability

available on 27 channels per base

Handset dimensions

Length: 170 mm/6.8 inches (without antenna)

 

Width: 58 mm/2.32 inches

 

Overall Thickness: 40 mm/1.60 inches

Handset range

Typical range of 95 m/300 feet, depending on

 

the physical environment

Handset weight

280 g/9.38 oz. (with battery pack)

Battery Pack

Capacity: 1400 mAh, 3.6 V

 

Talk Mode: up to five hours (with backlight

 

OFF)

 

Standby Mode: up to 72 hours

Base dimensions

Length: 150 mm/6 inches

 

Width: 160 mm/6.4 inches

 

Height (front): 28 mm/1.12 inches

 

Height (rear): 34 mm/1.36 inches

Base power

Input: 110 VAC, 60 Hz

 

Output: 9 VDC, 600 mA

P0942257 04

Image 14
Contents T7406 Cordless Telephone Installation Guide P0942257 Contents Low battery Safety Important Safety Instructions Installation Use Contents Operational Parameters Provisioning the T7406Operational Bandwidths Installation Site Parameters RF LANs Radio Frequency Local Area Networks Telephone-to-Base RangeEnvironmental Layout Considerations Combination Office/Warehouse Environments Unsuitable for the T7406 Powering the T7406 Battery Charge ControllerSpecifications OFFImportant battery pack information Security of Conversation About your T7406 telephoneRadio range and coverage considerations Density and InterferenceT7406 Parts Lists Spare PartsHandset Overview Handset Signal Detection Out of range... message appearsHandset Features DisplayAntenna Installing the Base StationBase Station Features T7406 Pre-installation Programming Mounting BracketMounting and Connecting the Base Station Before you startCharging the T7406 Battery Pack First-time Charging Recharge Handset PowerLow battery Battery levels Handset ConfigurationImportant First-time Installation Information Identifying the Handsets to the System Assigning the Handset to the Base Station Configuring the Handset ID Number Using the Handset Display ButtonsConfiguring the First Handset to a Base Station Changing the Handset ID Password Assigning the Security Code Ring Type Setting Handset FeaturesConfigure the next handset to the base station Ringer Volume Lock HandsetHandset System Feature Notes Language36 / Setting Handset Features Button Mapping on the Handset Memory buttons Programming memory buttons System Feature codes Button InquiryHandset Asleep Save Battery Mode Handset Asleep Mode Feature ConditionsAnswer calls Make and Answer CallsMake a call Hold calls Mute microphoneBacklight On/Off Customize a handsetHelpful hints Cleaning battery contacts Assigning the SecurityInstalling the T7406 Handset Accessories Installing the T7406 Handset Accessories Headset Compatibility Optional accessoriesLeather carrying cases Headset installation US Regulations Regulatory informationCanadian Regulations Federal Communications Commission FCC NoticeEMI/EMC FCC Part For Class a Host equipmentFor Class B Host equipment SafetyImportant Safety Instructions Installation Use54 / Regulatory information Regulatory information
Related manuals
Manual 2 pages 29.98 Kb