Getting started | 7 |
|
|
2.Batteries will come inserted in the battery compartment. Pull the plastic tag as instructed to activate the batteries.
3.Place the handset on the base to charge the batteries for at least 16 hours.
The main handset is
(Handset 1). This is shown on the display. When the handset is fully charged the display shows the 
symbol.
4.After 16 hours, connect the telephone line cord to the base and plug the other end into the wall socket.
Telephone line cord
Which socket?
Power socket
Telephone line socket
Talk/Standby time
Under ideal conditions, fully charged handset batteries should give about 10 hours talk time or 100 hours standby time on a single charge.
Battery low warning
If the 
symbol is flashing, you will need to recharge your handset before using it.
Battery performance
To keep your batteries in the best condition, leave the handset off the base for a few hours at a time (after the initial 16 hour charge).
New NiMH batteries do not reach full capacity until they have been in normal use for several days. Running the batteries right down at least once a week will help them last as long as possible.
IMPORTANT
Only use the power supply and telephone line cord supplied with your BT Freestyle 3500 otherwise the telephone may not work.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com