BT BT RELATE 3000 manual 1571, M1- M3 Quickdial buttons

Page 15

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 15

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

				Using the phone		15

1571				IMPORTANT
If you subscribe to your network’s answering service, for				To use 1571 you must first subscribe
If you subscribe to your network’s answering service, for				to the service from your network
example BT Call Minder, the		button gives you easy,		provider. You may be charged a fee.
example BT Call Minder, the		button gives you easy,
one-touch access.				For more information on BT’s
				answering services and other BT
When you have a message waiting the			button will	Calling Features, call BT on Freefone
When you have a message waiting the			button will	0800 800 150.
flash. The	button may also flash, e.g. if you are using			0800 800 150.
flash. The	button may also flash, e.g. if you are using
Call Diversion.

1.Lift handset and press to dial your network’s answering service.

Or, just press to dial in handsfree.

M1– M3 Quickdial buttons

You can store a phone number and name under each of the three Quickdial buttons – (M1), (M2) and (M3).

Storing

1.Press . Display shows WHERE?.

2.Press a Quickdial button (M1, M2 or M3) under which you want to store the entry. Display shows ENTER NUMBER… then STORE.

3.Enter the phone number and press . Display shows

ENTER NAME… then STORE.

You may choose to turn the detection off, see page 25.

It is possible to store a number under each of the 3 Quickdial buttons, unless M3 = Recall, see page 25.

Names can be up to 12 characters long and numbers up to 21 digits.

Quickdial Memory label

Keep a note of stored numbers on the quickdial memory label.

Entering names

Use the keypad letters to enter names, e.g. to store TOM:

Press 8 once to enter T. Press 6 three times to enter O. Press 6 once to enter M.

To edit or delete letters or numbers

you can use the or button to scroll between the letters and numbers.

Image 15

Contents User Guide To your BT Relate 3000 Telephone with Caller Display Welcome…Relate 3000 UG 2 12/8/04 1119 am Store name and number Dial from the directory Delete entries This guideGeneral information HelpBattery low warning Battery performanceGetting started Plug the other end into the mains power wall socket Attach the base stand optional Handset hook Relate 3000 check thatGetting to know your phone Button Handset park only required when base is wall-mountedCalls button Directory buttonUsing the phone HandsfreePlease note Adjust loudspeaker volume SecrecyRedial Use the keypad to enter the name then press to confirm 1471Repeatedly to find the number you want PressM1- M3 Quickdial buttons 1571Data port Press to confirm you want to deleteCable from data device Where can I buy a headset? HeadsetHeadset cable Inserting a Pause DirectoryPress to delete. Display confirms Deleted Caller Display and the calls list Caller DisplayCalls list New calls indicator View the Calls listPress and hold or, repeatedly press , to scroll to Personalise your phone Setting your preferencesPersonalise your phone Beeps tones Factory setting is to adjust the volume of Incoming callsVIP ringer Voice promptsSwitchboard and with certain BT Calling Features Recall button. Recall is used when connected to aM3 = Quickdial or Recall . . . . . . Quickdial Factory settingsOriginal settings on your BT Relate 3000 are 1571Help General information SafetyTechnical information Recall Switchboard compatibilityGuarantee This guarantee does not affect your statutory rightsFor your records Outside of the 12 month guarantee period Within the 12 month guarantee periodDeclaration of Conformance TTEOfﬁces worldwide