BT BT RELATE 3000 manual Personalise your phone, Setting your preferences

Page 22

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 22

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

22Personalise your phone

M1

M2

M3

Holding the button down will save any settings changed and exit the set-up mode.

The selected option will be shown flashing.

For setting the time, see the instructions on page 7.

Setting your preferences

Using the button located between the (M2) and (M3) buttons, you can adjust some of the settings on

your BT Relate 3000 to suit your personal preferences.

1.Press . Display shows WHERE?. Now press .

The display shows SETUP MODE then HOLD STORE TO EXIT.

2.Press repeatedly to display (in the following order): Ringer tone – R1, R2, R3

LCD contrast – 1,2,3,4,5 Amplify lock is on/off VIP ringer is on/off Voice prompt is off/on Beep tone is on/off Amplify is incoming/outgoing Key lock is on/off

Memory 3 is not/is recall 1571 Detection on/off Time – 12:00AM

3.When the setting you want to personalise is displayed,

press to switch between the options. The option that is flashing will be the one that is stored.

Image 22

Contents User Guide Welcome… To your BT Relate 3000 Telephone with Caller DisplayRelate 3000 UG 2 12/8/04 1119 am This guide Store name and number Dial from the directory Delete entriesHelp General informationBattery performance Battery low warningGetting started Plug the other end into the mains power wall socket Attach the base stand optional Relate 3000 check that Handset hookGetting to know your phone Directory button Handset park only required when base is wall-mountedCalls button ButtonHandsfree Using the phonePlease note Secrecy Adjust loudspeaker volumeRedial Press 1471Repeatedly to find the number you want Use the keypad to enter the name then press to confirm1571 M1- M3 Quickdial buttonsPress to confirm you want to delete Data portCable from data device Headset Where can I buy a headset?Headset cable Directory Inserting a PausePress to delete. Display confirms Deleted Caller Display Caller Display and the calls listCalls list View the Calls list New calls indicatorPress and hold or, repeatedly press , to scroll to Setting your preferences Personalise your phonePersonalise your phone Voice prompts Factory setting is to adjust the volume of Incoming callsVIP ringer Beeps tonesRecall button. Recall is used when connected to a Switchboard and with certain BT Calling Features1571 Factory settingsOriginal settings on your BT Relate 3000 are M3 = Quickdial or Recall . . . . . . QuickdialHelp Safety General informationTechnical information Switchboard compatibility RecallThis guarantee does not affect your statutory rights GuaranteeFor your records Within the 12 month guarantee period Outside of the 12 month guarantee periodTTE Declaration of ConformanceOfﬁces worldwide