BT BT RELATE 3000 manual Plug the other end into the mains power wall socket

Page 7

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 7

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

	Getting started	7
2. Plug the other end into the mains power wall socket.	The voice prompts will not work if
	the mains power is not connected
batteries	and switched on.
batteries

WARNING Please disconnect

the telephone line cord before opening this cover

UM-30R "AA" SIZE

Connect the telephone line

1. Plug the telephone line cord into the telephone wall socket.

Setting the time

1.Press . Display shows WHERE?. Now press (located between the and memory buttons). The display briefly shows SETUP MODE then HOLD STORE TO EXIT before moving to the first option RINGER TONE.

2.Press repeatedly until the display shows 12:00AM or the currently set time.

3.Use the keypad to enter the time, e.g. 0907 = 9:07.

The clock is 12 hour format.

4.Use the buttons to select AM or PM, then press to save the settings and return to standby.

If you have subscribed to your network’s Caller Display service, the time will be set automatically when you receive your first call.

Holding the button down will save any settings changed and exit the set-up mode.

Image 7

Contents User Guide To your BT Relate 3000 Telephone with Caller Display Welcome…Relate 3000 UG 2 12/8/04 1119 am Store name and number Dial from the directory Delete entries This guideGeneral information HelpBattery performance Battery low warningGetting started Plug the other end into the mains power wall socket Attach the base stand optional Handset hook Relate 3000 check thatGetting to know your phone Button Handset park only required when base is wall-mountedCalls button Directory buttonHandsfree Using the phonePlease note Secrecy Adjust loudspeaker volumeRedial Use the keypad to enter the name then press to confirm 1471Repeatedly to find the number you want PressM1- M3 Quickdial buttons 1571Press to confirm you want to delete Data portCable from data device Headset Where can I buy a headset?Headset cable Inserting a Pause DirectoryPress to delete. Display confirms Deleted Caller Display Caller Display and the calls listCalls list View the Calls list New calls indicatorPress and hold or, repeatedly press , to scroll to Personalise your phone Setting your preferencesPersonalise your phone Beeps tones Factory setting is to adjust the volume of Incoming callsVIP ringer Voice promptsSwitchboard and with certain BT Calling Features Recall button. Recall is used when connected to aM3 = Quickdial or Recall . . . . . . Quickdial Factory settingsOriginal settings on your BT Relate 3000 are 1571Help General information SafetyTechnical information Recall Switchboard compatibilityThis guarantee does not affect your statutory rights GuaranteeFor your records Outside of the 12 month guarantee period Within the 12 month guarantee periodDeclaration of Conformance TTEOfﬁces worldwide