BT BT RELATE 3000 manual Help

Page 27

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 27

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

		Help		27
		Help		27

Many common problems are caused by the telephone cord or the mains power being incorrectly connected or the batteries being installed incorrectly or not being installed at all.

If you do experience any problems, please check that your

BT Relate 3000 has been correctly set up, see page 6.

No display

The batteries may be dead. Replace the batteries.

See page 6.

Mains power adaptor may not be connected. See page 6.

No dial tone

Check that the telephone line cord is correctly plugged into the phone socket and the underside of the base.

No Caller Display

Have you subscribed to the service from your network provider and is it switched on?

No ring tone

Have you switched the ringer volume to Off? See page 8.

No voice prompts

Is the mains power connected and switched on? See page 6.

Image 27

Contents User Guide To your BT Relate 3000 Telephone with Caller Display Welcome…Relate 3000 UG 2 12/8/04 1119 am Store name and number Dial from the directory Delete entries This guideGeneral information HelpBattery low warning Battery performanceGetting started Plug the other end into the mains power wall socket Attach the base stand optional Handset hook Relate 3000 check thatGetting to know your phone Button Handset park only required when base is wall-mountedCalls button Directory buttonUsing the phone HandsfreePlease note Adjust loudspeaker volume SecrecyRedial Use the keypad to enter the name then press to confirm 1471Repeatedly to find the number you want PressM1- M3 Quickdial buttons 1571Data port Press to confirm you want to deleteCable from data device Where can I buy a headset? HeadsetHeadset cable Inserting a Pause DirectoryPress to delete. Display confirms Deleted Caller Display and the calls list Caller DisplayCalls list New calls indicator View the Calls listPress and hold or, repeatedly press , to scroll to Personalise your phone Setting your preferencesPersonalise your phone Beeps tones Factory setting is to adjust the volume of Incoming callsVIP ringer Voice promptsSwitchboard and with certain BT Calling Features Recall button. Recall is used when connected to aM3 = Quickdial or Recall . . . . . . Quickdial Factory settingsOriginal settings on your BT Relate 3000 are 1571Help General information SafetyTechnical information Recall Switchboard compatibilityGuarantee This guarantee does not affect your statutory rightsFor your records Outside of the 12 month guarantee period Within the 12 month guarantee periodDeclaration of Conformance TTEOfﬁces worldwide