BT BT RELATE 3000 manual Personalise your phone

Page 23

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 23

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

Personalise your phone	23

4.Press to save the option selected.

5.Repeat the actions described in point three for any other settings you wish to change.

6.Press and hold to exit the set-up mode and return to stand-by.

Ringer tone

Choose from three ring tones – R1, R2, R3.

LCD contrast

Select between 5 contrast levels for the display screen.

Amplify lock

Your BT Relate 3000 will remember the last selected volume level for incoming or outgoing calls when amplify lock is switched on.

You can switch between ON and OFF for this setting. When OFF is selected your phone will revert to the factory setting after use. These are:

WARNING

If Amplify lock is set to on, the volume may be very loud. All users of your BT Relate 3000 should be made aware when the amplify lock is set to on.

Handset: Normal volume (setting one)

Handsfree: Mid-volume (setting three)

Headset: Normal volume (setting one)

Image 23

Contents User Guide To your BT Relate 3000 Telephone with Caller Display Welcome…Relate 3000 UG 2 12/8/04 1119 am Store name and number Dial from the directory Delete entries This guideGeneral information HelpGetting started Battery low warningBattery performance Plug the other end into the mains power wall socket Attach the base stand optional Handset hook Relate 3000 check thatGetting to know your phone Button Handset park only required when base is wall-mountedCalls button Directory buttonPlease note Using the phoneHandsfree Redial Adjust loudspeaker volumeSecrecy Use the keypad to enter the name then press to confirm 1471Repeatedly to find the number you want PressM1- M3 Quickdial buttons 1571Cable from data device Data portPress to confirm you want to delete Headset cable Where can I buy a headset?Headset Inserting a Pause DirectoryPress to delete. Display confirms Deleted Calls list Caller Display and the calls listCaller Display Press and hold or, repeatedly press , to scroll to New calls indicatorView the Calls list Personalise your phone Setting your preferencesPersonalise your phone Beeps tones Factory setting is to adjust the volume of Incoming callsVIP ringer Voice promptsSwitchboard and with certain BT Calling Features Recall button. Recall is used when connected to aM3 = Quickdial or Recall . . . . . . Quickdial Factory settingsOriginal settings on your BT Relate 3000 are 1571Help General information SafetyTechnical information Recall Switchboard compatibilityFor your records GuaranteeThis guarantee does not affect your statutory rights Outside of the 12 month guarantee period Within the 12 month guarantee periodDeclaration of Conformance TTEOfﬁces worldwide