BT BT RELATE 3000 manual Attach the base stand optional

Page 8

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 8

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

8Getting started

		Setting the ringer volume
		The ringer switch is located on the underside of your
		Relate 3000. There are 3 volume levels: OFF, LOW and HI.
		Your BT Relate 3000 is now ready to use.
		You may wish to make additional personalised settings.
		Turn to page 22 to read about the options.
	Position in 3 different ways	Attach the base stand (optional)
		Attach the base stand (optional)
		Your BT Relate 3000 can be positioned in 3 different ways;
	Flat	either on a flat surface, in a raised position or wall-mounted
	Flat	using the screws and wall plugs provided.
		using the screws and wall plugs provided.

Raised on a ﬂat surface

1.Make sure all the cables on the underside of the base are pressed into the cable channels and not in the way.

Raised

2. Insert the clips on the base stand into the holes in the base of your phone marked

RAISED POSITION. You may need to be quite firm to fix it securely.

Wall mounted

Image 8

Contents User Guide Welcome… To your BT Relate 3000 Telephone with Caller DisplayRelate 3000 UG 2 12/8/04 1119 am This guide Store name and number Dial from the directory Delete entriesHelp General informationGetting started Battery low warningBattery performance Plug the other end into the mains power wall socket Attach the base stand optional Relate 3000 check that Handset hookGetting to know your phone Handset park only required when base is wall-mounted Calls buttonDirectory button ButtonPlease note Using the phoneHandsfree Redial Adjust loudspeaker volumeSecrecy 1471 Repeatedly to find the number you wantPress Use the keypad to enter the name then press to confirm1571 M1- M3 Quickdial buttonsCable from data device Data portPress to confirm you want to delete Headset cable Where can I buy a headset?Headset Directory Inserting a PausePress to delete. Display confirms Deleted Calls list Caller Display and the calls listCaller Display Press and hold or, repeatedly press , to scroll to New calls indicatorView the Calls list Setting your preferences Personalise your phonePersonalise your phone Factory setting is to adjust the volume of Incoming calls VIP ringerVoice prompts Beeps tonesRecall button. Recall is used when connected to a Switchboard and with certain BT Calling FeaturesFactory settings Original settings on your BT Relate 3000 are1571 M3 = Quickdial or Recall . . . . . . QuickdialHelp Safety General informationTechnical information Switchboard compatibility RecallFor your records GuaranteeThis guarantee does not affect your statutory rights Within the 12 month guarantee period Outside of the 12 month guarantee periodTTE Declaration of ConformanceOfﬁces worldwide