BT BT RELATE 3000 manual Getting started, Battery low warning, Battery performance

Page 6

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 6

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

6Getting started

WARNING

Do not place your BT Relate 3000 in the bathroom or other humid areas.

Battery low warning

When your batteries need replacing the battery low icon is displayed.

Replace the batteries by following the steps for battery installation.

Battery performance

New batteries will power your

BT Relate 3000 display for approx. 18 months provided you are also using the mains adaptor to power your BT Relate 3000. If you do not use the power supply then the battery life is approximately 6 months.

Even if your batteries run out or are removed, your BT Relate 3000 will retain any personalised settings for:

One-touch Quickdial memories

Display contrast

Voice prompt

VIP ringer

Loudspeaker volume

Ring tone

Location

Make sure your BT Relate 3000 is close enough to a telephone socket so that the cable will reach.

Install the batteries

1.Turn the phone over, remove the battery compartment cover, then insert the 4 AA alkaline batteries as indicated.

2. Replace the battery cover.

Connect the mains power adaptor

1.Plug the mains power adaptor into the POWER socket on the base of your BT Relate 3000.

Image 6

Contents User Guide Welcome… To your BT Relate 3000 Telephone with Caller DisplayRelate 3000 UG 2 12/8/04 1119 am This guide Store name and number Dial from the directory Delete entriesHelp General informationBattery low warning Battery performanceGetting started Plug the other end into the mains power wall socket Attach the base stand optional Relate 3000 check that Handset hookGetting to know your phone Directory button Handset park only required when base is wall-mountedCalls button ButtonUsing the phone HandsfreePlease note Adjust loudspeaker volume SecrecyRedial Press 1471Repeatedly to find the number you want Use the keypad to enter the name then press to confirm1571 M1- M3 Quickdial buttonsData port Press to confirm you want to deleteCable from data device Where can I buy a headset? HeadsetHeadset cable Directory Inserting a PausePress to delete. Display confirms Deleted Caller Display and the calls list Caller DisplayCalls list New calls indicator View the Calls listPress and hold or, repeatedly press , to scroll to Setting your preferences Personalise your phonePersonalise your phone Voice prompts Factory setting is to adjust the volume of Incoming callsVIP ringer Beeps tonesRecall button. Recall is used when connected to a Switchboard and with certain BT Calling Features1571 Factory settingsOriginal settings on your BT Relate 3000 are M3 = Quickdial or Recall . . . . . . QuickdialHelp Safety General informationTechnical information Switchboard compatibility RecallGuarantee This guarantee does not affect your statutory rightsFor your records Within the 12 month guarantee period Outside of the 12 month guarantee periodTTE Declaration of ConformanceOfﬁces worldwide