Appendix
Troubleshooting
Out of range OR no power at base appears on my cordless handset.
•Ensure that the telephone base is powered up.
•Move the cordless handset closer to the telephone base. You might have moved out of range.
•Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
•Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
The batteries do not hold a charge.
•If the cordless handset is in the charger and the charge light does not come on, refer to The charge light is off (page 21) in this Troubleshooting guide.
•Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the charger when not in use.
•If the battery is depleted, it may take approximately five minutes to charge the handset before it shows Low battery. See page 8 for details.
•You may need to purchase a new battery. Please refer to Battery installation and charging (pages
16