AT&T TL86109, TL86009, TL 86009 My calls cut in and out while I’m using my cordless handset

Page 24

Appendix

Troubleshooting

My calls cut in and out while I’m using my cordless handset.

Other electronic products such as HAM radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Do not install this phone near a microwave oven or on the same electrical outlet. You may experience decreased performance while the microwave oven is operating.

If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this doesn’t solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector.

Relocate your telephone base to a higher location. The phone may have better reception when installed in a high area.

If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your telephone service provider (charges may apply).

Excessive background noise will cause a speakerphone to fade in and out. Try controlling the background noise by turning off any audio devices near the speakerphone. Also, try to avoid interrupting the person at the other end of the conversation while they are speaking. If background noise cannot be controlled, you should stop speakerphone operation and return to normal handset mode.

When using a speakerphone, controlling background noise in your environment is essential. While you are listening to your party, press the MUTE softkey to temporarily turn your microphone off. When it is your turn to speak, remember to press the MUTE softkey to turn the microphone on.

20

Image 24
Contents User’s manual Congratulations Parts checklist Table of contents User’s manualInstallation Avoid placing the telephone base too close toQuick reference guide SoftkeysTone Menu Charger installation Install the charger as shown belowBattery installation and charging StepCharge light SET Battery charging Low battery orHandset X at least Belt clip & optional headset To attach the belt clipTo remove the belt clip Adding and registering handsets Expand your telephone system Add and register a handsetTo reset Replace a handsetTo deregister all handsets Troubleshooting My phone doesn’t work at allCannot get a dial tone Cannot dial outMy cordless handset isn’t performing normally Handset registration is unsuccessfulBatteries do not hold a charge Troubleshooting Experience poor sound quality when using the speakerphone Hear other calls while using my phoneMy cordless handset does not ring when I receive a call My calls cut in and out while I’m using my cordless handset My telephone does not receive caller ID when on a call Charge light is offMy caller ID isn’t working Common cure for electronic equipment Maintenance Cleaning your telephoneTaking care of your telephone Avoid waterImportant safety information Safety informationEspecially about corded telephones Precautions for users of implanted cardiac pacemakers Pacemaker patientsEspecially about telephone answering systems FCC Part 68 and Acta Industry Canada FCC Part Limited warranty What does this limited warranty cover?How long is the limited warranty period? How do you get warranty service? Other limitations Technical specifications Dect 6.0 digital technologyTelephone operating range Extended range and clarity