Lexmark CS410 manual Tips on using transparencies, Tips on using envelopes

Paper and specialty media guide 44

Source	Printing	Printable side	Paper orientation
Multipurpose feeder	Two‑sided	Faceup	Load the sheet
			with the bottom
			edge entering the
			printer first.

Note: Check with the manufacturer or vendor to determine whether or not the preprinted letterhead is acceptable for laser printers.

Tips on using transparencies

Print a test page on the transparencies being considered for use before buying large quantities.

•From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the transparencies loaded in the tray.

•Print a test page on the transparencies being considered for use before buying large quantities.

•Feed transparencies from the 250-sheet tray, manual feeder, or multipurpose feeder.

•Use transparencies designed specifically for laser printers.

•Avoid getting fingerprints on the transparencies to prevent print quality problems.

•Before loading transparencies, flex, fan, and straighten the stacks to prevent sheets from sticking together.

Tips on using envelopes

•From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the envelopes loaded in the tray.

•Print samples on the envelopes being considered for use before buying large quantities.

•Use envelopes designed specifically for laser printers.

•For best performance, use envelopes made from 90‑g/m2 (24‑lb) paper or 25% cotton.

•Use only new envelopes from undamaged packages.

•To optimize performance and minimize jams, do not use envelopes that:

–Have excessive curl or twist.

–Are stuck together or damaged in any way.

–Have windows, holes, perforations, cutouts, or embossing.

–Have metal clasps, string ties, or folding bars.

–Have an interlocking design.

–Have postage stamps attached.

–Have any exposed adhesive when the flap is in the sealed or closed position.