Lexmark CS410 manual Security Audit Log menu, Set Date and Time menu

Understanding the printer menus		79
	Use	To
	Automatic Method	Mark all disk space used by a previous print job. This method does not permit the file
	Single pass	system to reuse this space until it has been cleared.
	Multiple pass	Notes:
		• “Single pass” is the factory default setting.
		• Only automatic wiping enables users to erase temporary data files without
		having to turn off the printer for an extended amount of time.
		• Highly confidential information should be erased using only the Multiple pass
		method.
Security Audit Log menu
	Use	To
	Export Log	Let an authorized user export the audit log.
		Notes:
		• To export the audit log from the printer control panel, attach a flash drive to
		the printer.
		• The audit log can be downloaded from the Embedded Web Server and saved
		on a computer.
	Delete Log	Specify whether or not audit logs are deleted.
	Yes	Note: Yes is the factory default setting.
	No
	Configure Log	Specify how and whether or not audit logs are created.
	Enable Audit	Notes:
	Yes
		• Enable Audit determines if events are recorded in the secure audit log and
	No
		remote syslog. No is the factory default setting.
	Enable Remote Syslog
		• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
		factory default setting.
	Yes
		• Remote Syslog Facility determines the value used to send logs to the remote
	Remote Syslog Facility
		syslog server. 4 is the factory default setting.
	0–23
		• If the security audit log is activated, then the severity value of each event is
	Severity of Events to Log
		recorded. 4 is the factory default setting.
	0–7
Set Date and Time menu
	Use	To
	Current Date and Time	View the current date and time settings for the printer.