Lexmark CS410 manual Custom Types menu, Universal Setup menu, Units of Measure, Portrait Width

Understanding the printer menus 68

Custom Types menu

Use	To
Custom Type [x]	Associate a paper or specialty media type with a factory default Custom Type [x]
Paper	name or a user‑defined custom name created in the Embedded Web Server or
Card Stock	MarkVisionTM Professional.
Transparency	Notes:
Glossy	• Paper is the factory default setting for Custom Type [x].
Rough/Cotton
	• The custom media type must be supported in the selected tray or feeder
Labels
	in order to print from that source.
Envelope
Recycled	Specify a paper type when Recycled is selected.
Paper	Notes:
Card Stock
	• Paper is the factory default setting.
Transparency
	• The Recycled paper type must be supported in the selected tray or
Glossy
Rough/Cotton	feeder in order to print from that source.
Labels
Envelope

Universal Setup menu

Use	To
Units of Measure	Identify the units of measure.
Inches	Notes:
Millimeters
	• Inches is the U.S. factory default setting.
	• Millimeters is the international factory default setting.
Portrait Width	Set the portrait width.
3–14.17 inches	Notes:
76–360 mm
	• If the width exceeds the maximum, then the printer uses the
	maximum width allowed.
	• 8.5 inches is the U.S. factory default setting. You can increase the
	width in 0.01‑inch increments.
	• 216 mm is the international factory default setting. You can increase
	the width in 1‑mm increments.
Portrait Height	Set the portrait height.
3–14.17 inches	Notes:

76–360 mm

•If the height exceeds the maximum, then the printer uses the maximum height allowed.

•14 inches is the U.S. factory default setting. You can increase the height in 0.01‑inch increments.

•356 mm is the international factory default setting. You can increase the height in 1‑mm increments.