Lexmark CS410 Repeating defects appear on prints, Tray linking does not work, Troubleshooting 167

Troubleshooting 167

Repeating defects appear on prints

)

)

)

Action	Yes		No
a Check if the distance between the defects is equal to one of the	1 Check if the		The problem is solved.
following:	distance between
• 25.1 mm (0.98 in.)	the defects is
• 29.8 mm (1.17 in.)	equal to one of the
	following:
• 43.9 mm (1.72 in.)
	•	37.7 mm
• 45.5 mm (1.79 in.)
		(1.48 in.)
• 94.2 mm (3.70 in.)	•	78.5 mm
b If the distance between the defects equals 25.1 mm (0.98 in.), 29.8 mm		(3.09 in.)
(1.17 in.), or 94.2 mm (3.70 in.), then replace the photoconductor unit.	•	95 mm
c If the distance between the defects equals 43.9 mm (1.72 in.) or		(3.74 in.)
45.5 mm (1.79 in.), then replace the developer unit.	2 Take note of the
	distance, and then
Do the repeating defects still appear?	contact customer
	support or your
	service
	representative.

Tray linking does not work

Notes:

•The trays can detect paper length.

•The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper Size/Type menu.

Action	Yes	No
Step 1	The problem is solved.	Go to step 2.

aOpen the trays, and then check if they contain paper of the same size and type.

•Check if the paper guides are in the correct positions for the size of the paper loaded in each tray.

•Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray.

bResend the print job.

Do the trays link correctly?