AT&T PARTNER Plus Communications System Release 3 manual Main Circuit Breaker Power Jack Lights

Page 12

4

5

A)To power down the control unit, pull out the main circuit breaker on the control unit.

On a PARTNER Plus 220V system, move the on/off switch to the “off” position (“O”).

B)Press the AC power cord firmly into the power jack on the top right side of the backplane until it locks into place.

C)Plug the other end of the power cord into a properly grounded three-prong wall outlet not controlled by a switch.

D)To power up the control unit, push in the main circuit breaker.

On a PARTNER Plus 220V system, move the on/off switch to the “on” position (“l”).

Check all green lights on the fronts of the modules. If all the lights are lit, you can go to the next section; otherwise:

A)If a single light is out, power down the control unit, reseat the module, then power up the control unit.

If multiple lights are out, power down the control unit, reseat the first leftmost module that has a light out, then power up the control unit.

B)If the lights are still out, call the appropriate support telephone number as instructed on the inside front cover.

Main Circuit Breaker

Power

Jack

Lights

8 Installation Procedures

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AT&T Copyright 1992 AT&T All Rights Reserved Issue June WarrantyTrademarks Ordering InformationContents Important Safety Instructions Additional Safety Instructions for Installation PersonnelInstallation OverviewAn Example System Setup Control UnitExtensions Control Unit Extensions Required Parts Required PartsInstallation Guidelines Telephones and DevicesUsing a Direct Connection Combination ExtensionsInstallation Procedures Installing the Control Unit and ModulesMain Circuit Breaker Power Jack Lights Connecting Lines and Extensions Page Connecting Caller ID Display Units RoomAssembling System Phones Desk MountingWall Mounting Wall Mounting Phones with Separate StandsWall Mounting Phones with Fixed Stands Connecting and Testing Telephones Base of the phone off the topPaging System Music-on-Hold Audio SourceCall Reporting Smdr Printer Connecting Intercom Autodialers For the Intercom AutodialerEquipment Upgrades Adding New ModulesReplacing System Modules Equipment Upgrades Specifications Capacities SystemSmdr Output 518-455-213 June

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.
Top Page Image Contents