AT&T PARTNER Plus Communications System Release 3 manual Connecting Lines and Extensions

Page 13

Connecting Lines and Extensions

If extensions are not wired to any modular jacks, call a qualified service technician.

1 A) Test for dial tone at the network interface jacks before connecting outside lines to the control unit. For the test, connect a standard phone to the first network interface jack.

B)Lift the handset and listen for dial tone. (If there is no dial tone, contact your local telephone company before continuing.)

C)Repeat for each network interface jack.

2 A) Connect line cords to the line jacks on 206 and 400 modules, starting with the top line jack on the leftmost 206 module.

B)Route each cord through the hook on the front of the module, and then push the cords through the space below the module and out through the back.

C)Pull the cords from behind the backplane, leaving at least two feet of slack in the cords (for future maintenance so you can easily reconnect cords after replacing system modules).

3 Connect the free end of each line cord to the appropriate network interface jack.

4

A)

Test the lines—plug a system phone into extension

 

 

10. Press the line buttons for each outside

 

 

line and listen for dial tone.

 

B)

Repeat for extensions 16, 22, and 28 (if

 

 

available).

555-1343

555-1344

555-1345

555-1346

Network

Interface

Jacks

Installation Procedures 9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents AT&T Warranty Copyright 1992 AT&T All Rights Reserved Issue JuneTrademarks Ordering InformationContents Additional Safety Instructions for Installation Personnel Important Safety InstructionsOverview InstallationControl Unit An Example System SetupExtensions Control Unit Extensions Required Parts Required PartsTelephones and Devices Installation GuidelinesCombination Extensions Using a Direct ConnectionInstalling the Control Unit and Modules Installation ProceduresMain Circuit Breaker Power Jack Lights Connecting Lines and Extensions Page Room Connecting Caller ID Display UnitsDesk Mounting Assembling System PhonesWall Mounting Phones with Separate Stands Wall MountingWall Mounting Phones with Fixed Stands Base of the phone off the top Connecting and Testing TelephonesMusic-on-Hold Audio Source Paging SystemCall Reporting Smdr Printer For the Intercom Autodialer Connecting Intercom AutodialersAdding New Modules Equipment UpgradesReplacing System Modules Equipment Upgrades Capacities System SpecificationsSmdr Output 518-455-213 June

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.
Top Page Image Contents