AT&T PARTNER Plus Communications System Release 3 manual Smdr Output

Page 25

SMDR Output

■

1200 baud

Format

■

No parity

 

■

8 data bits

 

■

2 stop bits

 

 

 

Environmental

■

Mount on a wall at least 2 feet (0.6 meters) from the floor (wall mounting required)

Requirements—

■

Locate within 5 feet (1.5 meters) of the network interface jacks and an electrical outlet not

Control Unit

 

controlled by a switch, using supplied 7-foot (2.1-meter) cords

 

■

Operating temperature 32° to +104°F (0° to +40°C), not in direct sunlight

 

■

Humidity 15%–90%, noncondensing

 

■

For proper ventilation and easy replacement of modules, provide at least 6" (2.34cm) clearance

 

 

at the top and sides and 2 feet (0.6 meters) at the front and bottom of the control unit.

 

■

Locate in an area free of excess moisture, corrosive gases, dust, and chemicals

 

 

 

Electrical

■

90–130 VAC, 50–60 Hz, 3-prong outlet separate ground, separately fused at 15 Amps

Requirements

 

On a PARTNER Plus 220V System: 180–264 VAC, fused at 10 Amps

 

■

Outlet must not be controlled by an on/off switch

 

■

Grounding to comply with Underwriters Laboratories (UL) 1459:

A. An insulated grounding conductor that is not smaller in size and equivalent in insulation material and thickness to the grounded and ungrounded branch circuit supply conductors, except that it is green with or without one or more yellow stripes, is to be installed as part of the circuit that supplies the product or system.

B. The grounding conductor mentioned in item A is to be connected to ground at the service

 

 

equipment.

 

C. The attachment-plug receptacles in the vicinity of the product or system are all to be of a

 

 

grounding type, and the grounding conductors serving these receptacles are to be connected

 

 

to earth ground at the service equipment.

 

Requirements for Installation of a telephone or other standard (tip/ring) device in another building requires the

Out-of-Building

following In-Range Out-of-Building (IROB) protectors to protect the control unit and device from

Extensions

electrical surges:

 

■

MLS-model telephone: two AT&T IROB protectors

 

■ Standard device: one AT&T IROB protector plus one carbon block protector

 

 

 

Wiring

■

MLS-model phones: AT&T SYSTIMAX™ or at least 2-pair (4-wire) star (“home run” not “loop”)

 

■

Other standard telecommunications equipment (single-line phones, fax machines, answering

 

 

machines, etc.): 1-pair (2-wire) mounting cords (AT&T D2R mounting cords recommended)

 

■

Bridging adapter: AT&T 267F2

 

■

Range: 1,000 feet (305 meters) for MLS phones; 3,000 feet (915 meters) for standard devices

 

 

Safety

■ U.S.: Meets UL 1459 Issue 2

Requirements

■ Canada: Meets CSA C22.2, 225

 

 

 

 

Government

■

U.S.:

FCC Part 68

Approvals and

 

 

FCC registration number (U.S.): AS5 USA-61630-KF-E

Local Phone

 

 

FCC Part 15 Class A

Company

 

 

REN (outside line jack): 0.9A per line jack

Information

 

 

Jack type: RJ11C

■ Canada: DOC CP01, Issue 7

DOC registration number (Canada): 230 3756 DOC CS03, Issues 6 & 7

Load Number = 7 Loop start lines

Specifications 21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents AT&T Warranty Copyright 1992 AT&T All Rights Reserved Issue JuneTrademarks Ordering InformationContents Additional Safety Instructions for Installation Personnel Important Safety InstructionsOverview InstallationControl Unit An Example System SetupExtensions Control Unit Extensions Required Parts Required PartsTelephones and Devices Installation GuidelinesCombination Extensions Using a Direct ConnectionInstalling the Control Unit and Modules Installation ProceduresMain Circuit Breaker Power Jack Lights Connecting Lines and Extensions Page Room Connecting Caller ID Display UnitsDesk Mounting Assembling System PhonesWall Mounting Phones with Separate Stands Wall MountingWall Mounting Phones with Fixed Stands Base of the phone off the top Connecting and Testing TelephonesMusic-on-Hold Audio Source Paging SystemCall Reporting Smdr Printer For the Intercom Autodialer Connecting Intercom AutodialersAdding New Modules Equipment UpgradesReplacing System Modules Equipment Upgrades Capacities System SpecificationsSmdr Output 518-455-213 June

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.
Top Page Image Contents