AT&T PARTNER Plus Communications System Release 3 manual Connecting Intercom Autodialers

Page 20

Connecting Intercom Autodialers

Since the autodialer has a fixed stand, you may need to adjust the height of the system phone—by installing a stand—to match the height of the autodialer. Refer to Step 2 of “Desk Mounting” under “Assembling System Phones” for instructions.

You can wall mount an Intercom Autodialer to work next to a wall-mounted system phone; however, wall-mounting system display phones is not recommended.

1

A)

Unplug the phone’s modular telephone cord from

 

 

the jack on the bottom of the phone and the

 

 

wall jack, and save the cord for Step 1D.

 

B)

Plug one end of the D8W cord, supplied with the

 

 

autodialer, into the jack on the bottom of the

 

 

phone. (If the phone has multiple jacks, plug

 

 

the cord into the “LINE” jack.)

 

C)

Route the other end through the groove at the

 

 

back of the autodialer and plug it into the OUT

 

 

jack.

 

D)

Route one end of the modular telephone cord

 

 

through the groove at the back of the

 

 

autodialer and plug it into the IN jack; plug the

 

 

other end into the wall jack for extension 10 or

2

 

11.

A)

Connect the keyed power cord, supplied with the

 

 

autodialer, to the POWER jack on the bottom

 

 

of the autodialer, routing it through the groove

 

 

as you did in Step 1.

 

B)

If the keyed power cord is not attached to the

 

 

power supply unit, plug the free end of the

 

 

cord into the modular jack on the power

 

 

supply unit; otherwise, go to Step 2C.

 

C) Plug the power unit into the electrical outlet.

 

 

CAUTION:

 

 

Use only the power unit supplied by AT&T

3

 

for the Intercom Autodialer.

A)

Arrange the autodialer on your desk next to the

 

 

phone.

B) Remove the plastic cover from each autodialer and label the button sheet with employee names. Place the button sheet back on the autodialer, and then carefully replace the plastic cover.

Power

Unit

In Out

Power

Wall Jack

16 Installation Procedures

Page 19 Page 21
Image 20
Page 19 Page 21
Contents AT&T Copyright 1992 AT&T All Rights Reserved Issue June WarrantyTrademarks Ordering InformationContents Important Safety Instructions Additional Safety Instructions for Installation PersonnelInstallation OverviewExtensions An Example System SetupControl Unit Control Unit Extensions Required Parts Required PartsInstallation Guidelines Telephones and DevicesUsing a Direct Connection Combination ExtensionsInstallation Procedures Installing the Control Unit and ModulesMain Circuit Breaker Power Jack Lights Connecting Lines and Extensions Page Connecting Caller ID Display Units RoomAssembling System Phones Desk MountingWall Mounting Phones with Fixed Stands Wall MountingWall Mounting Phones with Separate Stands Connecting and Testing Telephones Base of the phone off the topCall Reporting Smdr Printer Paging SystemMusic-on-Hold Audio Source Connecting Intercom Autodialers For the Intercom AutodialerEquipment Upgrades Adding New ModulesReplacing System Modules Equipment Upgrades Specifications Capacities SystemSmdr Output 518-455-213 June

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.
Top Page Image Contents