AT&T PARTNER Plus Communications System Release 3 manual

Page 14

5 A) Connect modular telephone cords to 206 module extension jacks, starting at the top extension jack on the leftmost module.

B)Route each cord through the hook on the front of the module, and then push the cords through the space below the module and out through the back.

C)Pull the cords from behind the backplane, leaving at least two feet of slack to allow easy replacement of system modules (for future maintenance so you can easily reconnect cords after replacing system modules).

D)Connect the free end of each modular telephone cord to the modular connecting blocks for system extensions.

6 A) Place the cover on the control unit—this is especially important to keep the modules dust-free and the system working efficiently. To cover the control unit, while holding the cover at an angle, gently move the top rear edge of the cover over the top of the control unit.

B)Match up the grooves where the top edge of the cover meets the backplane, and gently push the edge into place.

C)Lower the bottom of the cover until it is secured in place.

10 Installation Procedures

Page 13 Page 15
Image 14
Page 13 Page 15
Contents AT&T Trademarks Copyright 1992 AT&T All Rights Reserved Issue JuneWarranty Ordering InformationContents Important Safety Instructions Additional Safety Instructions for Installation PersonnelInstallation OverviewExtensions An Example System SetupControl Unit Control Unit Extensions Required Parts Required PartsInstallation Guidelines Telephones and DevicesUsing a Direct Connection Combination ExtensionsInstallation Procedures Installing the Control Unit and ModulesMain Circuit Breaker Power Jack Lights Connecting Lines and Extensions Page Connecting Caller ID Display Units RoomAssembling System Phones Desk MountingWall Mounting Phones with Fixed Stands Wall MountingWall Mounting Phones with Separate Stands Connecting and Testing Telephones Base of the phone off the topCall Reporting Smdr Printer Paging SystemMusic-on-Hold Audio Source Connecting Intercom Autodialers For the Intercom AutodialerEquipment Upgrades Adding New ModulesReplacing System Modules Equipment Upgrades Specifications Capacities SystemSmdr Output 518-455-213 June

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.
Top Page Image Contents