AT&T PARTNER Plus Communications System Release 3 manual Paging System, Music-on-Hold Audio Source

Page 19

Connecting Paging, Music-On-Hold,

and Call Reporting (SMDR) Devices

Only steps for connection to the processor module are provided here. Refer to Chapter 4 of the PARTNER Plus Programming and Use guide and the manufacturer’s instructions for additional information on installing, programming, and using these devices.

Paging System

1 Insert the modular plug into the PAGE jack on the processor module.

2 Route the cord as you did for line and extension cords, then connect it to the paging system.

Music-on-Hold Audio Source

If you use equipment that rebroadcasts music or other copyrighted materials, you may be required to obtain a license from a third party such as ASCAP or BMI. Or you can purchase a Magic On Hold system from AT&T, which does not require you to obtain such a license.

1 A) Insert an RCA phono plug into the MUSIC ON HOLD jack on the processor module.

B)Route the cord as you did for line and extension cords, and then connect it to the audio source.

2 A) First set the unit’s volume to the lowest setting. Use

a flathead screwdriver to turn the volume control on the processor module counterclockwise until it stops.

B)Place a call on hold and listen while adjusting the volume, clockwise. If you do not hear music at any setting, check “Music On Hold (#602)” in Chapter 5 of the PARTNER Plus Communications System Programming and Use guide.

Call Reporting (SMDR) Printer

1 Insert one end of a D8W modular cord into the SMDR jack on the processor module.

2 Plug the other end into an AT&T 355A adapter and then plug the 355A adapter into the RS-232C serial port on the printer.

PAGE Jack

Paging System (optional)

Volume Control

MUSIC ON HOLD

Jack

Audio Source

(optional)

SMDR Jack

AT&T

Call Accounting Terminal Printer

(optional)

Installation Procedures 15

Image 19
Contents AT&T Ordering Information Copyright 1992 AT&T All Rights Reserved Issue JuneWarranty TrademarksContents Additional Safety Instructions for Installation Personnel Important Safety InstructionsOverview InstallationControl Unit An Example System SetupExtensions Control Unit Extensions Required Parts Required PartsTelephones and Devices Installation GuidelinesCombination Extensions Using a Direct ConnectionInstalling the Control Unit and Modules Installation ProceduresMain Circuit Breaker Power Jack Lights Connecting Lines and Extensions Page Room Connecting Caller ID Display UnitsDesk Mounting Assembling System PhonesWall Mounting Phones with Separate Stands Wall MountingWall Mounting Phones with Fixed Stands Base of the phone off the top Connecting and Testing TelephonesMusic-on-Hold Audio Source Paging SystemCall Reporting Smdr Printer For the Intercom Autodialer Connecting Intercom AutodialersAdding New Modules Equipment UpgradesReplacing System Modules Equipment Upgrades Capacities System SpecificationsSmdr Output 518-455-213 June

PARTNER Plus Communications System Release 3 specifications

The AT&T PARTNER Plus Communications System Release 3 represents a significant advancement in business telecommunications, designed to cater to the needs of small to medium-sized enterprises. This versatile phone system offers a range of features, technologies, and characteristics that enhance productivity and streamline communication.

One of the hallmark features of the PARTNER Plus system is its modular design, allowing businesses to customize their communication setup according to their specific requirements. This scalability means that as a business grows or changes, the system can easily adapt without necessitating a complete overhaul. With support for up to 48 extensions, businesses can expand their communication capabilities seamlessly.

The system boasts a user-friendly interface that simplifies operation and management. The intuitive design enables users to navigate through features like call forwarding, voicemail, and conferencing with ease. Furthermore, the built-in Caller ID feature enhances call management, ensuring that users can identify incoming calls efficiently, contributing to better customer service.

The PARTNER Plus system also incorporates advanced voicemail capabilities, including the ability to assign voicemail to individual extensions. This feature allows for personalized messages, making it easier for customers to connect with the right department or individual. Voicemail-to-email integration is another powerful characteristic, enabling users to receive voice messages directly in their email inbox, enhancing accessibility.

In terms of technology, the PARTNER Plus system supports both analog and digital lines, offering flexibility in connectivity options. This adaptability allows businesses to choose the most economical solution based on their existing infrastructure. Additionally, the system supports telemarketing and call screening features, helping businesses manage sales and customer communications effectively.

Another notable characteristic of the PARTNER Plus system is its compatibility with various add-on equipment and accessories. This includes cordless handsets, speakerphones, and wireless headsets, which enhance mobility and communication ease within the workplace.

In conclusion, the AT&T PARTNER Plus Communications System Release 3 stands out as a robust and flexible solution for businesses seeking reliable, efficient, and sophisticated communication tools. With its combination of modular design, user-friendly features, and advanced technology, it effectively addresses the evolving demands of contemporary businesses while promoting improved connectivity and productivity. Whether for a small startup or an established enterprise, the PARTNER Plus system is an invaluable asset in navigating the complexities of modern communication.