AT&T Generic 2 manual Programmable Dialing Buttons 8102, Personalized Ring for 8102 and 8110 Users

Personalized Ring (for 8102 and 8110 Users) ■

The tone selector labeled HI--LOwill help you select one of two tone-ringer frequencies. Slide the tone selector to HI for a higher frequency; slide the tone selector to LO for a lower frequency.

The tone selector labeled FAST--SLOWwill help you select one of two tone-ringer modulation rates. Slide the tone selector to FAST for a faster modulation rate; slide the tone selector to SLOW for a slower modulation rate.

The 3-position switch on the side of your telephone allows you to control the volume for the tone ringer.

●Slide it up (away from you) for a louder ring.

●Slide it down (toward you) for a quieter ring.

Programmable Dialing Buttons (8102 and 8110) ■

The 12 programmable dialing buttons are provided for one-touch dialing of frequently dialed telephone numbers. You can also store emergency numbers, such as 911, and feature codes on these buttons.

Shipped with each telephone is a button designation card on which you can write the names or numbers or codes stored on each of the programmable dialing buttons. Use the procedure directly below to remove the plastic cover on the front of your telephone and place the designation card under it.

Note: You can program up to 20 elements (digits and characters such as a # or *) on a programmable dialing button. If the number you want to store is longer than 20 elements, you can do one of the following:

●Store up to 20 elements on one button; store the remainder of the elements on a second button. To place a call using these buttons, press the first button; when all of the elements have been dialed, press the second button in the sequence.

●Store up to 20 elements on one button; dial the remainder of the digits and characters manually.

Important: Some environments may want to disable the PROGRAM and PAUSE buttons so that the programmable dialing buttons cannot be reassigned. To remove and cover these two buttons and the two topmost programmable dialing buttons, you will need to use the 8102 and 8110 Telephones D-Kit (D182363), COMCODE 106248370. This kit includes a plastic cover and a special button designation card to fit over these buttons.

17