AT&T Generic 1, System 85, System 75, Generic 2 instruction

Dial pad	The standard 12-button pad for dialing telephone
	numbers. The dial pad is also used with the PROGRAM
	button to store numbers on the programmable dialing
	buttons or to store dialing access codes in the Redial
	Auto-Pause feature.
Handset jack	For connecting the handset to your telephone.
Speaker button (on the 8110	For accessing the built-in speakerphone and microphone
only)	combination.
Flash button	For using features such as Conference with business
	communications systems, and for custom calling
	features if you are using your telephone at home.

Program button (on the 8102 and 8110 only)

For storing telephone numbers on the programmable dialing buttons and dialing access codes in the Auto- Pause feature of Redial

The SIDE VIEW shows the following features:

Mode Selector (Tone or Pulse)	For selecting one of two dialing modes (tone or pulse).
(on the 8101 only)

Positive Disconnect

(ON or OFF) (on the 8101 only)

Tone Selector (HI or LO) (on the 8102 and 8110 only)

Tone Selector (FAST or SLOW) (on the 8102 and 8110 only)

Ringer Volume control

Speaker volume control (On the 8110 only)

For selecting positive disconnect or turning it off (on or off).

For selecting one of two tone ringer frequencies (high or low).

For selecting one of two tone ringer modulation rates (fast or slow).

A 3-position switch to control the volume for the tone ringer. Slide it up (away from you) for a louder ring, down (toward you) for a quieter ring. The volume control is labeled

For raising or lowering the volume of the built-in speakerphone. The volume control is

labeled

For selecting one of two dialing modes (tone or pulse).