AT&T Generic 1, System 85, System 75, Generic 2 manual

[recall dial tone]

Version Note: If you are using System 75, Version 2, Version 3, or DEFINITY Generic 1, the following directions apply:

To put a call on hold	1 Press [ Flash ]	[recall dial tone]
	2 Dial Hold code	[dial tone]
	Note: If you hang up, held call sends a 3-burst
	priority ring.

To return to held call	Hang up, receive 3-burst priority ring, and lift
	handset

To put call 1 on hold and place call 2

1Press [ Flash ]

2Dial Hold code

● Call 1 is put on hold

3Dial call 2 (or another feature)

[recall dial tone]

[dial tone]

Note: If you hang up, call 1 sends a 3-burst priority ring.

To put call 2 on hold and return to call 1

1 Press [ Flash ]

2Dial Hold code

●Call 2 is put on hold, and call 1 is reconnected

Note: If you hang up, call 2 sends a 3-burst priority ring.

To complete call 2 and return to call 1

1After party on call 2 hangs up, hang up, receive 3-burst priority ring, and lift handset

30