Redial (With Auto-Pause) (8102 and 8110 Users) ■
To program an automatic pause for redialed numbers
1While the telephone is
press the PROGRAM button | [programming tone] |
2Press [ Redial ]
3Press the appropriate access code and number of
pauses in order to insert a long enough waiting time to obtain a second dial tone.
For example, if you need two pauses inserted between the access code, such as 9, and the remainder of the telephone number you are dialing, you would press the PAUSE button twice
Note: You may store up to three different access code or pause combinations. Each code can have up to three characters and up to four pauses.
4Press the PROGRAM button again
EXAMPLE: In the following example, there are three different access code or pause
combinations.
1Press the PROGRAM button
[programming tone]
2Press [ Redial ]
3Dial 9 and then press the PAUSE button three times
(PAUSE PAUSE PAUSE). Since each depression of the PAUSE button adds .5 seconds of waiting time, this initial access code (three depressions of the PAUSE button) is 1.5 seconds.
4Dial *9 (the second access code needed in the dialing sequence in this example) and then press the PAUSE button twice (PAUSE PAUSE)
5Dial *8 (the third access code needed in this sequence) and then press the PAUSE button four times (PAUSE PAUSE PAUSE PAUSE)
20