Intercom (Automatic/Dial)
To make a call to your | 1 | Press [ Icom Auto xxx ] (while | [ringback tone] | |
predetermined |
| ● Intercom ring is sent |
| |
Automatic Intercom |
|
| ||
|
|
| ||
partner |
|
|
| |
|
|
|
| |
To dial a call to a | 1 | Press [ Icom Dial xxx ] (while | [dial tone] | |
member of your Dial | 2 | Dial group member’s 1- or | ||
Intercom group | ||||
| ● Intercom ring is sent |
| ||
|
|
| ||
|
|
| ||
To answer any | 1 | Pick up handset or press [ Speaker Reset Speaker ] | ||
intercom call |
| ● You are connected to call |
| |
|
|
|
Note: If you are active on another call, first press [ Hold ], then press flashing [ Icom ].
Last Number Dialed
To automatically redial the last number you dialed (extension, outside number, or trunk/feature code)
1Press [ Last Dialed ] (while
or dial Last Number Dialed code (while off-hook)
Note: This code is unique to your system and must be obtained from your System Manager.
●Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and System 85 R2V4 and some R2V3 systems. Check with your System Manager to learn if the feature is available on your system.
Limitations on this feature should be noted. Digits dialed via Abbreviated Dialing, feature dial codes, authorization codes, and Station Message Detail Recording (SMDR) account codes are NOT retained in memory and must be redialed for each call.
To see the number you | 1 Press [ Last Dialed ] (while |
last dialed | ● Last number dialed is shown |
|
21