Transfer
To send present call to another extension or outside number
Note: See your System Manager to determine if you can transfer a call to an outside number
1 Press [ Transfer ] | [dial tone] |
●Present call put on hold and you are given a new call appearance
2Dial extension or number to which the call is to be
transferred | [ringback tone] |
●Remain on the line and announce call if desired; if no answer or number dialed is busy, return to held call by pressing its call appearance
3Press [ Transfer ] again
●Call is sent to dialed extension or number
4Hang up or press [ Drop ]
Display Features
On/Off
The display is on when the telephone is on and off when the telephone is off.
Note: You may not have all of the Display Features listed below.
Normal Mode
In the normal mode, the display shows call information for the current active call appearance:
●You may have as many as 10 call appearances. Beginning with the first button in the upper left corner of your faceplate and going down, the display identifies the first 5 buttons as a through e; the 5 buttons in the second column are identified as f through j. When the display shows [ a= ], it represents call information for the first call appearance. The next button down would be shown as [ b= ], and so on, continuing through [ j= ] if all 10 of these buttons are used for call appearances.
●When you dial an extension, that number is shown and then replaced by the called party’s name and extension.
33