AT&T 7407 manual Self-Test, Send All Calls

Self-Test ✔

To test lights, ringer,

and display of your

telephone

1Press [ Select ] (while on-hook or off-hook)

●Green light goes on

2Press and hold [ Drop Test ]

●Ringer sounds

●All lights go on

●Display is activated

3Release [ Drop Test ] to end test

●Ringer and lights return to pretest state. Green light next to [ Select ] goes off.

Note: If ringer or lights do not respond during test, notify your System Manager.

Send All Calls

To send all incoming calls (except priority, intercom, and personal central office calls) immediately to an assigned extension, AUDIX, or message center for coverage

Note: Check with your System Manager to determine how your coverage path is set up

1Press [ Send All Calls ] (while on-hook or off-hook) or lift handset and dial Send All Calls code

[confirmation tone]

Note: You may hear a half ring as each call is sent to coverage if you have a DEFINITY Generic 2 or System 85 R2V4.

27