AT&T 7410 manual

Line jack

(on back of voice terminal)

Select button

Transfer button

Hold button

Dial pad

Volume control button

Handset jack

(on back of voice terminal)

Speaker button

Drop/Test button

Conference/Ring button

Message light

This jack is used for connecting a line cord to your voice terminal. This jack is labeled “LINE.”

When used with [ Conference/Ring ] you can select a personalized ring from 8 ringing patterns. When used with [ Drop/Test ] you can test the lights and ringer on your voice terminal.

For transferring a call to another voice terminal.

For putting a call on hold.

The standard 12-button pad for dialing phone numbers and accessing features. The letters, “Q” and “Z,” have been added to the appropriate dial pad keys for directory access, and the “5” button on your dial pad has raised bars for visually-impaired users.

For adjusting the volume of the loudspeaker associated with the speaker when you are using this feature and a call is in progress, or for adjusting the volume of the tone ringer when you are not using the speaker.

This jack is for connecting a handset to your voice

terminal. The jack is labeled .

For accessing the Speaker feature. This feature can be used for listening only. If you want to speak to the other party, you must lift the handset.

For disconnecting from a call or dropping the last party added to a conference call. When used with [ Select ] , you can test the lights and ringer on your voice terminal.

For setting up conference calls. When used with

[ Select ] , you can select a personalized ring for your voice terminal.

A red light that goes on steadily when a message has been left for you.