Or Dial Program code Dial tone | AT&T 7410 instruction

To program/reprogram an outside number, extension, or feature code into a personal list

1On a separate sheet of paper, jot down the outside numbers, extensions, and/or feature codes you want to program as items on your personal list(s) (see example to the left)

Note: Each phone number or feature code is stored as a separate item.

2 Pick up handset

[dial tone]

3Press [ Program ]

or Dial Program code

[dial tone]

4 Dial Personal List number (1, 2, or 3)

[dial tone]

5 Dial list item (1, 2, 3...)

[dial tone]

6Dial number you want to program (up to 24 digits)

Note: If you are programming an outside number, be sure to include a trunk code, if applicable.

7 Press [ # ]

[confirmation tone], [dial tone]

●Number is stored

●Repeat Steps 5-7 if you want to program additional items on the same list; press [ Drop/Test ] and begin again at Step 1 if you want to program items on another list

8Hang up or press [ Drop/Test ] to end programming

To place a call using a personal, group, system, or enhanced list

Note: Record your personal list items on the Abbreviated Dialing list in the back of this booklet; group, system, and enhanced lists can be obtained from the System Manager.

1Dial appropriate AD list code:

● List 1

●	List 2	[dial tone]
	List 2	[dial tone]
●	List 3

2Dial desired list item (1, 2, 3...)

●Call is dialed

Note: You can program a list code on one of your AD buttons for quicker access to a list. To place a call, simply press the AD button and then dial the desired list item.