AT&T 7410 manual Leave Word Calling LWC, Or Dial Last Number Dialed code, Ringback tone

To answer any intercom call

1Pick up handset

●You are connected to call

Note: If you are active on another call, first press [ Hold ] , then press flashing [ xxxxx ]

Last Number Dialed

To automatically redial the last number you dialed (extension, outside number, or trunk/feature code)

1 Press [ Last Dialed ]
or Dial Last Number Dialed code
(up to 24 digits)	[ringback tone]
2 Wait for called party to answer

Leave Word Calling (LWC)

To leave a message after dialing an extension (when your call is not answered, you hear a coverage or busy tone, or you have been put on hold)

Note: To do this, you must have a [ LWC ] button.

1Press [ LWC ] before hanging up your handset [confirmation tone]

●Message light goes on at called voice terminal

Note: If reorder tone is heard, message is not stored; try again.

To leave a message	1	Press [ L W C ]
without ringing an		or Dial Leave Word Calling code
extension			[dial tone]
	2	Dial extension	[confirmation tone]

●Message light goes on at called voice terminal

15