Getting started
Installation options
3. Connect the telephone line cord and power adapter to the jacks on the back of the telephone base. Bundle the tel- ephone cord, and secure it with a twist tie before placing it inside the bracket.
4. Plug the power adapter into an electrical outlet not controlled by a wall switch. the telephone line cord into a telephone wall jack. To mount the telephone on wall, position the mounting holes 
and 
over the telephone outlet mounting studs. Press and slide the bracket down firmly so the telephone is held securely on the tel- ephone outlet mounting studs.
Tabletop installation
To return the bracket from the wall mounting to tabletop position, follow the directions below.
1.Remove the telephone base from the wall. Unplug the cords from the wall jacks. Remove the bracket from the telephone base.
2.Rotate the bracket to tabletop positon, insert the bracket tabs into slots 
and 
on the tel- ephone base, then press the other bracket tabs into slots 
and 
.
3.Route cords through slots. Plug the other end of the telephone line cord into a tel- ephone wall jack. Plug the large end of the power adapter into an electrical out- let not controlled by a wall switch.
7