AT&T 8410 manual Speaker and Speakerphone

Speaker and Speakerphone

Your voice terminal is equipped with a speakerphone that can be configured in

aspeak-and-listen mode or in a listen-only mode. If your voice terminal is con- figured for speak-and-listen, you can use it for all calls and features. If your voice terminal is configured for a listen-only, you can use it to access features or to listen to messages, but you must use the handset when talking on a call.

To use the speaker/speakerphone, do the following:

1.Press Speaker .

■You hear a dial tone.

■If your voice terminal has a listen-only speaker, the Mute lamp goes on to remind you that the speaker is in the listen-only mode.

2.Place a call or access a feature.

To turn off the speaker/speakerphone and use the handset, do the following:

1.Pick up the handset.

■The speaker/speakerphone shuts off and the call goes through the handset.

2.Continue with your call.

To change from the handset to the speaker/speakerphone, do the following:

1.Press Speaker .

■The speaker/speakerphone comes on and the call goes through the speaker/speakerphone.

2.Hang up the handset.

To end a call while using the speaker/speakerphone, do the following:

1. Press Speaker .

34Issue 1 March 1996