To transfer the current call, do the following:
1.Press 
Transfer 
.
■The call is placed on hold.
■You hear a dial tone.
2.Dial the number to which the call is to be transferred.
■You hear a ringback tone.
3.Remain on the line and announce the call; if there is no answer or the
line is busy, return to the held call by pressing the held call appearance button.
4.Press 
Transfer 
again.
■The call is transferred.
5.Go
Volume Control
The volume control on your voice terminal can be adjusted to eight different vol- ume levels for the ringer, the speaker, and the handset. This is done by press- ing the 
Volume 
button when a call is ringing, when using the speaker, or when using the handset. Pressing the right side of the 
Volume 
button increases the volume, and pressing the left side of the 
Volume 
button decreases the volume. As you adjust the volume, the display shows the volume setting for the device you are adjusting:
a=
RINGER L>>>>> H
38Issue 1 March 1996