Crestron electronic DMTH4 quick start Introduction, Unpacking the unit

Page 5

Installation Guide

Introduction

The purpose of this guide is to assist in the setup and operation of a typical DMTH4 system. This guide assumes familiarity with the DM Series Digital Audio Processors, its components and software menus and setup screens. To get the most out of the DMTH4 system, it is suggested to review the information presented in the DMTH4 Series Reference Manual.

A detailed Help is also available to assist in the setup and operation of a DMTH4 system using the USB interface and a Windows® 2000 or Windows® XP computer system. In addition to assistance setting up and operating the DMTH4 system, the Help files include a complete listing of the DMTH4 Serial Commands. These commands can be used to setup and operate the DMTH4 system via external devices using either the USB or RS232 serial port.

Unpacking the unit

Compare the packing list enclosed with the unit with the original order. Inspect all items for damage. Immedi- ately call 1-800-821-1121 to report any items that are missing or damaged. The sooner we get notified, the sooner we can get any needed replacement items shipped to your location.

Rio Rancho, NM

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents DMTH4 DMTH4 LECTROSONICS, INC Important Safety Instructions Table of Contents Unpacking the unit IntroductionRear Panel Controls and FeaturesFront Panel Installing the DM system into a rack Hardware InstallationCables Audio ConnectionsTelephone Line Jack Audio Outputs AUX and CodecProgrammable Inputs Programmable OutputsExpansion I/O ports Codec and TEL Remote Control PortsInstalling LecNet2 Software Installing LecNet2 Software and USB DriverInstalling the LecNet2 USB Driver USB driver installation Windows XPInstallation of Additional Units or LecNet 2 devices USB Driver Installation Windows Control System Interconnections Basic System SetupInitial Setup Using the DMTH4 Control Panel to Change Master/Slave Mode Master/Slave ConfigurationInitial Setup Hints DMTH4 Example Teleconferencing SetupSetting up the DM1624 Expansion Matrix Setting up the DMTH4 Main MatrixSetting up the DM1624 Main Matrix Setting up the DMTH4 Output Source Multiplexer Make a Telephone Call Using the Activity Tab Make a Telephone Call Using a Telephone SetUsing the Touch Tone Pad Making a Phone CallUse the Phone Book Use the Type the number to dial boxConnecting to the Codec Interface using the Activity Tab FCC Part 15 Compliance FCC Part 68 ComplianceInstallation Guide Rio Rancho, NM Limited ONE Year Warranty
Top Page Image Contents