Furuno FS-1503 manual ITU telephony channels SSB, Sample displays of ITU telephony channel

ITU telephony channels (SSB)

To recall ITU SSB channel 412, for example, select J3E with the [MODE/1] key.

Press [CH], [4], [1], [2], [ENT], and a combination of Tx frequency of 4098 kHz and Rx frequency of 4390 kHz is selected. To select only Rx or Tx frequency, hit [RX] or [TX] first.

Rx frequency Rx band Rx CH No. Tx frequency Tx Band Tx CH No.

	ITU				ITU	T
DUP				DUP
	TR					TR
0 2 4 6 8 10 S			0 2 4			6 8 10 RF
		AGC NB					AGC NB
		J3E					J3E
		When receiving				When transmitting

Figure 1-6 Sample displays of ITU telephony channel

•The [CURS/2] key shifts the cursor to band or channel number.

•To change channel number use the [FREQ/CH] control; it changes the number above the cursor, a band or channel designator.

•The [ENT] key temporarily displays both Tx and Rx frequencies.

1-8