Telex TR-825, BTR-800 dimensions Group / Frequency Select

Page 42

Group / Frequency Select

The Group/Frequency select screen allows a user to set the group and select from a pre-determined number of frequencies on each receiver. Each frequency displayed on the right half of the screen corresponds to a channel number in the Group/Channel Screen.

Press [MENU] twice to go to the Group / Frequency Se- lect screen from the operating screen. Hit [SET] to start

the group number flashing.

Press the [UP] / [DOWN] arrows to change the group number. The frequencies listed will reflect what is cur-

rently in that group. Hitting [SET] will select the group and start the selecting of predetermined frequencies within that group. The R1 frequency will start flashing. NOTE: The group number sets the transmit frequencies of factory defined groups and these are not editable. In user-programmed groups these are editable from the fre- quency edit screen.

Pressing the [UP] / [DOWN] arrows will change the fre- quency of “R1” to the pre-defined frequencies available.

Hitting [SET] will accept the change and start you editing the next channel. If you had not hit the arrow keys when the frequency was flashing, but instead hit [SET], you would have skipped to the next frequency to edit.

After the last receive frequency is decided upon, hitting [SET] will save that last frequency and start you over at

the beginning of the group/frequency select screen with nothing flashing.

Pressing [MENU] will take you to the operating screen if this is a factory-defined group. If within a user pro-

grammed group, you will be taken to the frequency edit screen. NOTE: Hitting [MENU] after activity has oc- curred within the screen will return to the group/fre- quency edit screen with nothing flashing. Any change that had been done before the last [SET] was pressed will be aborted.

Group / Frequency Select

Group 15 R1 715.000

 

 

 

2 716.700

T1

568.500

3

719.700

T1

 

2

569.700

4 721.600

[UP] / [DOWN]

[SET]

Group 14 R1 713.200

2716.100

 

T1

561.700

3 718.600

 

 

 

T1

4

721.600

 

 

2

563.100

 

 

 

 

 

 

[UP] / [DOWN]

 

 

 

 

[SET]

 

 

 

 

 

 

 

 

Group 14

R1

704.200

 

 

2716.100

T1

561.700

3 718.600

T1

4 721.600

2

563.100

[UP] / [DOWN]

[SET] (Last Rx Changed)

Group 14 R1 704.200

2704.700

T1 561.700 3 708.300

T1 4

2 563.100 709.500

[MENU]

Group 14

R1 no

tx

T1

 

2 no

tx

On

3 Ch A

T1

4 Ch

B

2

On

END

7-7

Image 42
Contents JTN Telex Thank you for choosing RadioComTM Table of Contents Tech Tips System Features IntroductionGeneral Description BTR-800 Block Diagram WTA aControls and Connections Front Panel Local Headset WiringBTR-800 Base Station BTR-800 Front PanelControls and Connections Rear Panel BTR-800 Rear PanelBTR-800 Specifications OverallBlank TR-800 Beltpack Controls and Connections Top PanelTR-800 Top Panel Headset Jack Wiring TR-800 Rear Panel/Connector/AntennasPush-to-Talk/Push-to-Transmit Switch LCD Liquid Crystal DisplayTR-800 Specifications Blank TR-825 Beltpack Telex RAAudio + Audio a Switched Headphone Ground TR-825 Rear Panel/Connector/AntennasTR-825 Specifications Blank BTR-800 Initial Equipment Set-UpUnpacking TR-800, TR-825Antenna Polarization Antenna PlacementAntenna Connection Distance between AntennasDistance Between base station and beltpack Operating System Near ObstructionsKeeping Site Clear to Antenna Antenna Placement Improving Reception and Increasing RangeBase Station Set-up Power ConnectionTransmit Switches LocationInternal Transmit Switches Internal Transmit SwitchesIntercom Switch RJ-11 Type/ Four-wire PinoutRTS Distribution Panel TW5W Example Interface to an RTS TW SystemParts to be Removed by User to Enable Dual Listen Dual Listen FunctionalityAudio Board Part Number and Dual Listen Component Locations Internal Auxiliary Input Routing Switch Auxiliary Input Routing SwitchAuxiliary Input/Output Relay Contact Jack Adapter Screw Terminal Adapter Relay Output SchematicStage Announce / Relay Contacts Internal Stage Announce Level ControlBase Station Link Two Stand Alone Base Stations Connected TogetherBase Station Link Cable Battery Installation Beltpack Set-up Battery InstallationCharger and battery pack damage May resultTR-800 and TR-825 Rear Panel Transmit modeHeadset Connection Push-to-Talk PT Talk Recommended positionBlank Pre-Walk-Thru Checklist Blank System Quick Start System OperationFrequency Plan Overview Factory-Defined GroupsLocal Headset PowerBase Station Operation Intercom a and BDisplay Contrast LCD ContrastBTR-800 Menu Structure Main Screen Flowchart Power-Up Screen Operating ScreenBeltpack Activity Code Definitions Group / Channel Select UP / DownSET Last Rx Changed Group / Frequency Select Frequency Edit User-Programmed Groups OnlyClearScanTM ClearScanSpecial Key Sequences Lockout 1st Use DefaultFactory Default CopyBeltpack Operation TR-800 and TR-825 Top and Rear PanelBeltpack Feature Enable/Disable Menus TR-800 Menu Structure Beltpack Menu StructureTR-800 Menu Structure Power-Up Screens Power-Up ScreensTR-800 Menu Structure Group / Channel Screen Group / Channel ScreenTR-800 Menu Structure Transmit Screen Transmit ScreenTR-800 Menu Structure Receive 1 Screen Receive 1 ScreenTR-800 Menu Structure Receive 2 Screen Receive 2 ScreenTR-800 Menu Structure ClearScan ClearScanTR-800 Menu Structure Stage Announce Enable/Disable Wireless Talk Around Enable/DisableTR-800 Menu Structure Audio Channel a or B Disable/Enable Talk Button Latch on/Latch offTR-800 Menu Structure Special Key Sequences Lockout 04A Scn TR-825 Menu Structure Beltpack Menu StructureTR-825 Menu Structure Power-Up Screens TR-825 Menu Structure Group / Channel Screen 704.700 TR-825 Menu Structure Transmit ScreenTR-825 Menu Structure Receive 1 Screen TR-825 Menu Structure Receive 2 Screen Ab SEP TR-825 Menu Structure Audio Output04b TR-825 Menu Structure ClearScanTMTR-825 Menu Structure Stage Announce Enable/Disable SA onTR-825 Menu Structure Wireless Talk Around TA bTR-825 Menu Structure Audio Channel a Options Audio Channel a OptionsTR-825 Menu Structure Audio Channel B Options Hold SET and Press B Continue to Hold SET Press B AgainTR-825 Menu Structure Special Key Sequences Lockout System Walk-Thru Blank Troubleshooting Problem SolutionBlank Microphone Gain Adjustment Tech TipsFrequency Interaction Blank Battery Information Battery Life TR-800TR-825 Blank Intercom Systems Specifications CommonBlank Accessories and Replacement Parts Blank Software License End-User License Agreement for Telex SoftwareBlank Certification Information FCC LicensingEU Declaration of Conformity PN 803257-1 Rev. H March Made in U.S.A