Safety and Compliance, Modifications | Polycom IP 301 SIP manual

guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from

FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

Safety and Compliance

•Reboot the phone to attempt re-regis- tration with the server.

Part 15 Rules

This device is compliant with Part 15 of the

2.This device must accept any interferences received, including interference that may cause undesired operation.

Class B Digital Device or Peripheral

Note: This equipment is tested and com- plies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in- terference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to ra- dio communications. However, there is no

that to which the receiver is con- nected.

4.Consult the dealer or an experience radio/TV technician for help.

Rules, the user is cautioned that any changes or modifications not expressly approved by Polycom, Inc. could void the user’s author-

Installation must be performed in accor- dance with all relevant national wiring rules.

L’Installation doit être exécutée conformé-

Modifications

In accordance with Part 15 of the FCC

ity to operate the equipment.

Installation Instructions

ment à tous les règlements nationaux applicable au filage électrique.