Aiphone IP-EWST manual Listen button, Talk Mode

Page 15

Using TalkMaster

An important benefit of using Automatic mode is that other intercoms are precluded from interrupting your "conversation" because the Talk or Listen button is always active. TalkMaster will not interrupt a call if there is already one in progress. Any other intercom that tries to contact TalkMaster will be placed in the Calls Waiting list.

Example of using Listen mode Manual:

Please note that the following example uses the option of clicking and holding the Space Bar to activate the Talk button. Please see menu Admin - Preferences - Options for an alternate method of controlling the Talk button

Intercom user presses and holds the PTT button on one of the Intercoms and begins speaking.

The Intercom is selected in TalkMaster™ and the audio is through the PC speakers.

The Intercom user releases the PTT button when done speaking

The TalkMaster operator responds by holding down the Space Bar on the keyboard and speaking into the microphone..

When the TalkMaster operator releases the Space Bar, the Talk button turns off. The TalkMaster operator can then click the Listen button or allow the Intercom user to respond by using the PTT button.

To end the conversation with an Intercom, the TalkMaster operator presses the Escape key on the keyboard while the Listen button is active.

In Manual mode, it is possible for another intercom to interrupt your conversation by pressing the PTT button when neither the Talk nor Listen button is active.

Listen button

The Listen button can be activated by the TalkMaster operator or by the PTT button on an Intercom. You may only listen to a single intercom at one time.

In TalkMaster, with Listen Mode set to Automatic, the Listen button can be toggled by:

Deactivating the Talk button with the mouse or

Pressing the Escape key on your keyboard

Clicking the Listen button with the mouse

If Talk Mode has been set to Group or All Active, the Listen button is disabled and turns blue

Talk Mode

The Talk Mode setting determines which intercom(s) will hear audio sent from TalkMaster™.

12

Image 15
Contents TalkMaster Table of Contents Iii Welcome To TalkMaster WelcomeRelease Notes Welcome To TalkMaster System Requirements Page TalkMaster Overview Using TalkMasterTalkMaster Main Screen Tool Bar Intercom View / Custom View tab Using TalkMaster Calls Waiting Audio PlayerAuto Response Listen Mode Listen button Talk ModeUsing TalkMaster Paging Messages Talk / Page buttonAudio Archive System EventsPage Call Announcement Using Call AnnouncementIncoming Call Preferences and Setup PreferencesPreferences Options tab Preferences Multimedia tab Preferences Volume tab Paging Groups Preferences Legacy tabPaging Setup Capture Audio Archive Play Audio Archive Managed Intercoms Unattended Console TalkMaster Console ForwardingForward Intercoms Retrieve IntercomsTalkMaster Console Forwarding Tools Menu TalkMaster Menu OptionsFile Menu View MenuConsole Menu Admin MenuHelp Menu TalkMaster Menu Options Configuring Intercoms Configure IntercomsAdvanced Configuration Intercom Configuration TalkMaster Clients Configuring Intercoms Configuring Intercoms Intercom Configuration Direct Mode Configuring Intercoms Updating Firmware Icom Firmware Updating NIC Firmware UpdatingDo not Turn the Intercom OFF While the Firmware is Uploading Page Configuration Action Menu Intercom Configuration Tool Menu OptionsConfiguration File Menu Configuration View MenuPage Troubleshooting TroubleshootingChanging Recordings Troubleshooting LAN IndexWAN