Aiphone IP-EWST manual Configuring Intercoms

Configuring Intercoms

To set up the Server-Peer:

•Set as Server-Peer - Click this option

•Assign IP automatically with DHCP - This option is automatically grayed out

•Location Name - This option is automatically grayed out

•Assign this PC address as client’s server - Uncheck Assign this PC address as the client’s server and enter a fixed IP address and the Port number of the Server-Peer. You can change the default Port of 3000 as long as you specify the same port in the Client.

•List when Offline - This option does not apply to Direct Mode

•Apply - This option will save your settings to the selected intercom. After applying changes to an intercom, the unit will be reset and will be unavailable for 10-15 seconds

To set up the Client:

•Set as Client - Click this option

•Assign IP automatically with DHCP - The Intercom IP address information can be assigned as a Static IP address or can be dynamically assigned if your network has a DHCP server. To use DHCP, check the box Assign IP automatically with DHCP. Your system

38