Aiphone JK-1MED operation manual Restore default setting, Automatic night volume adjustment

Page 10

English


7-7	Automatic night volume adjustment
This automatically lowers the communication volume at the door station						3 In the "NIGHT TIME DOOR VOLUME CONTROL" screen, press
only at night.Initial setting: "Disabled"						 button or  button to select "ENABLE".
1 After performing step 1 in section 7-1, select "COMMUNICATION"
and press			MENU button (		).

Français

Nederlands

2 In the "COMMUNICATION SETTING" screen, press  button or

button to select "NIGHT VOLUME" and press MENU button

( ).

4 Press MENU button ( ) to complete the settings and return to the previous screen.

Press REC button ( ) to cancel the setting and return to the previous screen.

NOTES: Distinguishing between day and night is automatically done by the door station.

7-8 Restore default setting

All settings can be restored to their condition at the time of purchase.

1.Recorded pictures are erased and settings are reset.

2.Pre-set functions (section 8-7) are not reset.

Settings reset with "RESTORE DEFAULT SETTING"

Setting name

Available setting

Time

JAN/01/2009 00 : 00

Language

ENG

FRA ITA DUT SPA

Door station chime tone

1 (Tone 1)

2 (Tone 2) 3 (Tone 3) 4 (Tone 4)

Communication time

1 min.

2 min. 3 min. 5 min

Automatic night volume

Enable

Disable

adjustment

External

Detection

N/O

N/C

Disable

input

Notiﬁcation

OFF

OFF ON

at door

Sound time

30 sec.

Continuous Continuous

Press-to-talk setting

Enable

Disable

Pictures

・All saved pictures are erased.

Recording

・

Zoom x 3, Wide x 3

Screen

・Wide x 3, Zoom x 3

・Zoom x 6

・Wide x 6

1 After performing steps 1 and 2 in section 7-1, select "INITIALIZE"

with  or  and press MENU button ( ).

2 In the "INITIALIZE" screen, press		MENU button (	)


(approximately 1 sec.) to initialize. Press REC button (			) to

cancel initialization and return to the "MENU" screen.

3 4 LEDs light up during initialization. The screen goes out when initialization is complete. (The menu LED flashes)

※are initial views

- 10 -

Image 10

Contents JK-1MED Monitor-hoofdpostPrecautions Package ContentsWire the units from station-to-station daisy-chained Wiring method, wiring distanceCable 230V AC N WiringInsert wires securely into each terminal as shown AC transformerExternal sensor input Start signal only detection methodDry closure contact Detection MS or more Confirmation timeMounting Back wiringSurface wiring NamesManual, an explanation is given using REC button Setting UPSetting screens and display methods ※ Setting can also be done by pressing ZOOM/WIDE buttonAfter performing steps 1 and 2 in -1, select Language Initial Setting screenLED red will flash as a notification. Reset the time After performing steps 1 and 2 in -1, select DATE/TIMESetting communication time Previous screenRestore default setting Automatic night volume adjustmentSetting picture recording Press-to-talk setting2nd shot 4th shot 5th shot 3rd shot 6th shot Operations Answering a door call HANDS-FREE mode, PTT modePTT mode Instant voice call functionEntrance monitoring WIDE/ZOOM switchingPress ZOOM/WIDE button when a picture is displayed Room-to-room communicationZoom Picture Pre-set When communication ends, the illuminator LED will go outPan/tilt operation Night illuminationAutomatic recording Backlight adjustment, Night sensitivity adjustmentManual recording Images can be saved from the recorded images maximum Play recorded pictureSave recorded picture Images. Saved pictures are not overwrittenWarranty